Detailing Products > Microfiber Products

What cha cooking?

<< < (2/4) > >>

Rollingrock:

--- Quote from: Too Stroked on December 19, 2018, 06:22:36 AM ---Just to compare techniques, how long do you boil them for?

--- End quote ---

1 min each


I ended up getting about 40 boiled...about about 200 more to go.   LOL

I did do a quick test after the first back came out of the dryer...the really old red superflys are still not working properly but the newer ones seem to absorb much better.   

Could end up being a very painful process...and I could be throwing out some MF's.   

Kitzy:

--- Quote from: Rollingrock on December 19, 2018, 09:57:25 AM ---
--- Quote from: Too Stroked on December 19, 2018, 06:22:36 AM ---Just to compare techniques, how long do you boil them for?

--- End quote ---

1 min each


I ended up getting about 40 boiled...about about 200 more to go.   LOL

I did do a quick test after the first back came out of the dryer...the really old red superflys are still not working properly but the newer ones seem to absorb much better.   

Could end up being a very painful process...and I could be throwing out some MF's.

--- End quote ---
At least dedicate them to a task other than paint.  Interior or inside the house, even shop rags.  Can never have too many rags laying around even if they do only get used one more time and then tossed.  Thinking along the lines of oil changes and such. 

Sent from my Pixel 3 XL using Tapatalk

sscully:

--- Quote from: Kitzy on December 19, 2018, 02:58:41 PM ---At least dedicate them to a task other than paint.  Interior or inside the house, even shop rags.  Can never have too many rags laying around even if they do only get used one more time and then tossed.  Thinking along the lines of oil changes and such. 

Sent from my Pixel 3 XL using Tapatalk

--- End quote ---

This is what I do when I drop one.  It gets cut in half and used for wiping up spilled coffee in the garage or soaking up oil on the floor.

I might as well go out swinging is the way I look at it.
- It really pisses me off when I drop a MF while polishing, get out one that is brand new and drop that one in the next 15 min. :moody:

Blown F-150:
Make sure you've cleaned out the drum of the dryer with some APC. dryer sheet residue will ruin your effort.

Good use of the turkey fryer though! Wish I had one... :boohoo:

Rollingrock:

--- Quote from: Kitzy on December 19, 2018, 02:58:41 PM ---
--- Quote from: Rollingrock on December 19, 2018, 09:57:25 AM ---
--- Quote from: Too Stroked on December 19, 2018, 06:22:36 AM ---Just to compare techniques, how long do you boil them for?

--- End quote ---

1 min each


I ended up getting about 40 boiled...about about 200 more to go.   LOL

I did do a quick test after the first back came out of the dryer...the really old red superflys are still not working properly but the newer ones seem to absorb much better.   

Could end up being a very painful process...and I could be throwing out some MF's.

--- End quote ---
At least dedicate them to a task other than paint.  Interior or inside the house, even shop rags.  Can never have too many rags laying around even if they do only get used one more time and then tossed.  Thinking along the lines of oil changes and such. 

Sent from my Pixel 3 XL using Tapatalk

--- End quote ---

yuppers, all of mine have specific uses for different products, and places on the cars.

As of now for my inventory,

Red, Blue and Shag Rags are all for paint.   I mainly use the Shags for removing waxes and LSP's. 

Reds and Blues are mainly used for paint, including QD's, polishes etc.   

Yellow and Green are for wheels and glass and newer ones for interior.  (Like new out of the bag kind of new)


--- Quote from: Blown F-150 on December 19, 2018, 10:33:58 PM ---Make sure you've cleaned out the drum of the dryer with some APC. dryer sheet residue will ruin your effort.

Good use of the turkey fryer though! Wish I had one... :boohoo:

--- End quote ---

We don't use dryer sheets to my knowledge.    I know I don't with MF's for sure, not even sure where they would be in the utility room.   

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version