Got done with the convertible and mom & dad swapped cars and left their, new to them, 2010 honda CRV here.
I did not get the best pictures of the sides. i did get some good shots of the tailgate and the roof.
The clay replacement towel sounded like 60 grit sandpaper on the roof. There are a ton of etching on the roof and hood and there was something that looked like over spray or something on the sides.
Few shots to give you an idea of there I started at noon today
I just got done with the 1st coat of PL on it.
- I am going to wait until they get back in the spring to polish it and put Opti Coat on it. It is going to spend 4K or 5K miles behind the RV all over TX, NM, AZ and then back to FL the next 3 months.
Once I get the 2nd coat of PL on it, I will shot pictures of the finished work.
I used the Flex, run flat out ( speed 2 for Pl application ).
2-3 passes of Poorboy ProPolish on a LC orange pad
2 passes of PB PP on a White LC pad ( flex speed 6 )
1 pass of PB PP on a blue LC pad ( flex speed 6 ).
I tried the Rupes 15. Leave that for another review.