collapse collapse

* Cafe Shout Box

Sorry, this shoutbox does not exist.

* Board Stats

  • stats Total Members: 339
  • stats Total Posts: 40609
  • stats Total Topics: 3350
  • stats Total Categories: 13
  • stats Total Boards: 33
  • stats Most Online: 829

* Calendar

April 2024
Sun Mon Tue Wed Thu Fri Sat
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 [29] 30


The Cafe is OPEN
Detailing today? Check the Weather  http://www.weather.com/

Author Topic: Houston! I have a problem.  (Read 6544 times)

0 Members and 1 Guest are viewing this topic.

Offline GreyMichFX4

  • Café Member
  • **
  • Posts: 1569
Houston! I have a problem.
« on: April 13, 2014, 05:33:54 PM »
I finally figured out why the truck didn't feel like it was handling right after I hit that pothole and took out the right rear tire  a couple weeks ago.

I heard a loud pop today and when I looked this is what I found.



Good enough never is

Offline Too Stroked

  • Café Moderator
  • ***
  • Posts: 4682
  • Don't just be good at what you do - be the best!
Re: Houston! I have a problem.
« Reply #1 on: April 13, 2014, 05:42:48 PM »
Holy busted main leaf Batman! Yea, that would do it. I'd still check the alignment though. If it was a hard enough hit to brake the main leaf, it may have done some other harm too.

BTW, make sure you replace the U-Bolts. I popped one on the F-550 on the last plow run. It had rusted right through. I talked the boss into replacing all four while we were under it. One can only imagine whet would happen if I didn't hear it go and kept plowing until the other one let go. That would have been a sure roll over.

Offline GreyMichFX4

  • Café Member
  • **
  • Posts: 1569
Re: Houston! I have a problem.
« Reply #2 on: April 13, 2014, 05:53:34 PM »
It's going to a friends shop tomorrow and he's going to make sure nothing else is wrong with the truck.
Good enough never is

Offline Too Stroked

  • Café Moderator
  • ***
  • Posts: 4682
  • Don't just be good at what you do - be the best!
Re: Houston! I have a problem.
« Reply #3 on: April 13, 2014, 06:06:31 PM »
It's going to a friends shop tomorrow and he's going to make sure nothing else is wrong with the truck.
[/quote

What abut the loose nut behind the wheel?  :funny:]

Offline GreyMichFX4

  • Café Member
  • **
  • Posts: 1569
Re: Houston! I have a problem.
« Reply #4 on: April 13, 2014, 06:14:25 PM »
It's going to a friends shop tomorrow and he's going to make sure nothing else is wrong with the truck.
[/quote

What abut the loose nut behind the wheel?  :funny:]

 It's stripped.... :uugly:
Good enough never is

Offline Blown F-150

  • Café Member
  • **
  • Posts: 3270
  • Don't ask me if I read the instructions
Re: Houston! I have a problem.
« Reply #5 on: April 13, 2014, 06:24:45 PM »
Glad you found it before pulling any kind of load!

Mine was the exact same thing, the main was busted, but the centering pins on both sides were still fine.... :crazy:

Mine wasn't too much coin to get it all fixed an re-aligned.
2014 F-150 FX4 Blue Flame
2021 Explorer ST Atlas Blue

Offline sscully

  • Café Member
  • **
  • Posts: 1713
Re: Houston! I have a problem.
« Reply #6 on: April 13, 2014, 08:17:37 PM »

 It's stripped.... :uugly:

TMI, not something I needed to image right after eating supper.  :wow:
Steve

Offline Rollingrock

  • Administrator
  • *****
  • Posts: 7706
  • Milk was a bad idea.
    • The Detailer's Café
Re: Houston! I have a problem.
« Reply #7 on: April 13, 2014, 09:26:56 PM »
oh snap....errr bad comment.

At least Steve didn't call you Tony... 

 :cart:
Thanks for visiting the Cafe, come back often.  There's always something new!

Offline GreyMichFX4

  • Café Member
  • **
  • Posts: 1569
Re: Houston! I have a problem.
« Reply #8 on: April 14, 2014, 10:15:30 AM »
oh snap....errr bad comment.

At least Steve didn't call you Tony... 

 :cart:

Nice! :redneck:

This is true.....
Good enough never is

Offline GreyMichFX4

  • Café Member
  • **
  • Posts: 1569
Re: Houston! I have a problem.
« Reply #9 on: April 14, 2014, 02:22:43 PM »
My buddy just called and told me the drivers side and passenger side main springs are broken.  :dope:
Good enough never is

Offline sscully

  • Café Member
  • **
  • Posts: 1713
Re: Houston! I have a problem.
« Reply #10 on: April 14, 2014, 04:20:15 PM »
Crap !!!!

Still cheaper than a new truck is the way I look at it.
Steve

Offline Rollingrock

  • Administrator
  • *****
  • Posts: 7706
  • Milk was a bad idea.
    • The Detailer's Café
Re: Houston! I have a problem.
« Reply #11 on: April 14, 2014, 04:40:28 PM »
Spring packs cannot be too expensive right? 

Thanks for visiting the Cafe, come back often.  There's always something new!

Offline Blown F-150

  • Café Member
  • **
  • Posts: 3270
  • Don't ask me if I read the instructions
Re: Houston! I have a problem.
« Reply #12 on: April 14, 2014, 06:02:36 PM »
My buddy just called and told me the drivers side and passenger side main springs are broken.  :dope:

Wow, that had to have been one heck of a pot hole, unless they were already close to popping. I pinged a few buddies back home with PSD's after I found out about mine and it seems to be a fairly common thing :dunno:
2014 F-150 FX4 Blue Flame
2021 Explorer ST Atlas Blue

Offline GreyMichFX4

  • Café Member
  • **
  • Posts: 1569
Re: Houston! I have a problem.
« Reply #13 on: April 14, 2014, 06:53:49 PM »
Most of its labor I'm only relplacing the main springs and it's going to cost around $700. The truck has 212,000 on it and has had a trailer behind it since day one so I'm fairly impressed how this truck has held up.
Good enough never is

Offline Blown F-150

  • Café Member
  • **
  • Posts: 3270
  • Don't ask me if I read the instructions
Re: Houston! I have a problem.
« Reply #14 on: April 14, 2014, 07:25:10 PM »
$700 doesn't sound too bad, mine was $450 for the one side and alignment. Labor is a bugger.
2014 F-150 FX4 Blue Flame
2021 Explorer ST Atlas Blue

 


* Recent Photos

IMG_3202.JPG

Views: 2
By: Rollingrock

* Recent Topics


* Recent Posts

No posts were found.

* Top Boards


SimplePortal 2.3.3 © 2008-2010, SimplePortal