collapse collapse

* Cafe Shout Box

Sorry, this shoutbox does not exist.

* Board Stats

  • stats Total Members: 339
  • stats Total Posts: 40588
  • stats Total Topics: 3350
  • stats Total Categories: 13
  • stats Total Boards: 33
  • stats Most Online: 829

* Calendar

March 2024
Sun Mon Tue Wed Thu Fri Sat
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 [28] 29 30
31

No calendar events were found.

The Cafe is OPEN
Detailing today? Check the Weather  http://www.weather.com/

Author Topic: Correct snow removal from the paint?  (Read 5544 times)

0 Members and 1 Guest are viewing this topic.

Offline Old Dogg™

  • Café Member
  • **
  • Posts: 788
Correct snow removal from the paint?
« on: February 10, 2011, 11:15:12 AM »
For some time I have wondered...
If your paint is dirty...even slightly then the snow gets dirt in it after a few hours.
So isn't the probability of marring the paint definite if you just push or broom the snow off?
It just feels so wrong

All the effort only letting soft MF towels touch the paint so,
what is proper snow removal from the OCD detailer vehicles?
You can make money or you can make excuses but you can't do both.

Offline Kitzy

  • Administrator
  • *****
  • Posts: I am a geek!!
  • OCDer formerly known as ESF
Re: Correct snow removal from the paint?
« Reply #1 on: February 10, 2011, 11:42:40 AM »
I just use my arm to take most of it off, leaving a thin layer to melt on its own. 
If you always do what you\'ve always done, you\'ll always get what you\'ve always got.

Offline Too Stroked

  • Café Moderator
  • ***
  • Posts: 4680
  • Don't just be good at what you do - be the best!
Re: Correct snow removal from the paint?
« Reply #2 on: February 10, 2011, 11:55:20 AM »
I almost hate to admitt it, but I use the softest snow brush I could find, then brush very lightly. I also try to remove as little snow as possible, but if you remove too little, it all blows back / up and blinds you. So, I'd rather be safe and induce some marring (that I'll take out in the spring) than sorry.

Offline Poorboy

  • Detailing Supply Retailer
  • ***
  • Posts: 751
    • Poorboy's World Detailing Products
Re: Correct snow removal from the paint?
« Reply #3 on: February 10, 2011, 11:57:24 AM »
I just use my arm to take most of it off, leaving a thin layer to melt on its own. 


gee and i thought you were using your beard  :dope:

there is no correct way, but Mike has the idea ... I use a squeegee called first pass .. it is much sturdier than the California blade and i pull it off to within an inch of the paint... between driving and the heat generated by the engine and interior the rest melts off or flies off as you drive.
Any contact with the paint will cause some marring.. some might not be able to see immediately or at all if you are real careful.  My neighbor has this tool called a Pro-Brum  (better version of the Sno Brum ) it works well but again, i wouldn't go down to the paint.

Another option is to get a heated power washer  :dunno:
life is short ..do it while you can
www.poorboysworld.com
www.ultrafinish.com/store  (**new microfiber only site)

Offline Blown F-150

  • Café Member
  • **
  • Posts: 3255
  • Don't ask me if I read the instructions
Re: Correct snow removal from the paint?
« Reply #4 on: February 10, 2011, 12:56:14 PM »
Fire up the leaf blower! It's what I used to do back home. It only worked real well on light snow, but it was quick and I don't think it damaged the paint at all.
2014 F-150 FX4 Blue Flame
2021 Explorer ST Atlas Blue

Offline Kitzy

  • Administrator
  • *****
  • Posts: I am a geek!!
  • OCDer formerly known as ESF
Re: Correct snow removal from the paint?
« Reply #5 on: February 10, 2011, 02:56:01 PM »

gee and i thought you were using your beard  :dope:



I'm going to shave it and make a wash mitt out of it.
If you always do what you\'ve always done, you\'ll always get what you\'ve always got.

Offline Poorboy

  • Detailing Supply Retailer
  • ***
  • Posts: 751
    • Poorboy's World Detailing Products
Re: Correct snow removal from the paint?
« Reply #6 on: February 10, 2011, 03:36:07 PM »

gee and i thought you were using your beard  :dope:



I'm going to shave it and make a wash mitt out of it.

you will not !!! the chances you take the beard off are like Spring coming early  :crazy:
life is short ..do it while you can
www.poorboysworld.com
www.ultrafinish.com/store  (**new microfiber only site)

Offline Kitzy

  • Administrator
  • *****
  • Posts: I am a geek!!
  • OCDer formerly known as ESF
Re: Correct snow removal from the paint?
« Reply #7 on: February 10, 2011, 03:46:37 PM »
50 degrees by the end of next week.  Haha.  Just the winter coat though.  Most of it will stay.
If you always do what you\'ve always done, you\'ll always get what you\'ve always got.

Offline Poorboy

  • Detailing Supply Retailer
  • ***
  • Posts: 751
    • Poorboy's World Detailing Products
Re: Correct snow removal from the paint?
« Reply #8 on: February 10, 2011, 04:19:53 PM »
50 degrees by the end of next week.  Haha.  Just the winter coat though.  Most of it will stay.

one day near 50 is not spring .. i can't even see grass anywhere
life is short ..do it while you can
www.poorboysworld.com
www.ultrafinish.com/store  (**new microfiber only site)

Offline Kitzy

  • Administrator
  • *****
  • Posts: I am a geek!!
  • OCDer formerly known as ESF
Re: Correct snow removal from the paint?
« Reply #9 on: February 10, 2011, 04:25:57 PM »
Next weeks forecast starting Sunday for us is 43, 46, 42, 47, 55, 55, 45.  It can't be much different for you.
If you always do what you\'ve always done, you\'ll always get what you\'ve always got.

Offline Poorboy

  • Detailing Supply Retailer
  • ***
  • Posts: 751
    • Poorboy's World Detailing Products
Re: Correct snow removal from the paint?
« Reply #10 on: February 10, 2011, 05:11:15 PM »
Next weeks forecast starting Sunday for us is 43, 46, 42, 47, 55, 55, 45.  It can't be much different for you.

and you believe them  :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck: :redneck:
life is short ..do it while you can
www.poorboysworld.com
www.ultrafinish.com/store  (**new microfiber only site)

Offline Old Dogg™

  • Café Member
  • **
  • Posts: 788
Re: Correct snow removal from the paint?
« Reply #11 on: February 11, 2011, 01:21:37 AM »
there is no correct way, but Mike has the idea ... I use a squeegee called first pass .. it is much sturdier than the California blade and i pull it off to within an inch of the paint...


I guess this is the best compromise just to stay off the paint period...if it stays below freezing but when it warms up the OCD in me thinks the sliding action of the ice will still marr the paint.

I hate winter...  :bt:
You can make money or you can make excuses but you can't do both.

Offline Poorboy

  • Detailing Supply Retailer
  • ***
  • Posts: 751
    • Poorboy's World Detailing Products
Re: Correct snow removal from the paint?
« Reply #12 on: February 11, 2011, 11:03:58 AM »
there is no correct way, but Mike has the idea ... I use a squeegee called first pass .. it is much sturdier than the California blade and i pull it off to within an inch of the paint...


I guess this is the best compromise just to stay off the paint period...if it stays below freezing but when it warms up the OCD in me thinks the sliding action of the ice will still marr the paint.

I hate winter...  :bt:


oh it's quite possible that you will get some marring but if the weight of the ice sliding off is negligible then it really will only be surface marring
life is short ..do it while you can
www.poorboysworld.com
www.ultrafinish.com/store  (**new microfiber only site)

 


* Recent Photos

IMG_9471.JPG

Views: 3
By: Rollingrock

* Recent Topics


* Recent Posts

No posts were found.

* Top Boards


SimplePortal 2.3.3 © 2008-2010, SimplePortal