Interior Detailing > Interior Detailing Tips, Advice
Tint Removal
(1/1)
mpittm2:
anyone have any experience with this? the wife's tint has bubbled up on her accord and you can barely see now. do i just get after it with a razor blade or what?
GreyMichFX4:
Pull it off and then use a window cleaner with ammonia in it to take the adhesive off. Its going to be a slow messy process but it works.
Blown F-150:
I had to take mine off to pass vehicle inspection a couple of years ago. I used a razor blade then 50/50 iso/water and it seemed to make quick work of the adhesive left behind.\
Good luck!
Rollingrock:
--- Quote from: Blown F-150 on October 19, 2010, 11:00:58 PM ---I had to take mine off to pass vehicle inspection a couple of years ago. I used a razor blade then 50/50 iso/water and it seemed to make quick work of the adhesive left behind.\
Good luck!
--- End quote ---
X2 ....soap and water and brand new razor blades. Take care when dealing with defroster wires...those can be tricky.
Navigation
[0] Message Index
Go to full version