The Detailers Cafe

Show off Your Recent Detail => Café Detailing Gallery => Topic started by: Rollingrock on November 03, 2018, 08:15:30 PM

Title: Quick ONR
Post by: Rollingrock on November 03, 2018, 08:15:30 PM
Just a quick ONR.   More dirt than I expected. 

(https://uploads.tapatalk-cdn.com/20181104/d9fe1efe167ca68392b3c04ca3f0ce5e.jpg)(https://uploads.tapatalk-cdn.com/20181104/9003ca87c802f01e5e39c52e24ebe3a5.jpg)

Sent from my SM-G960U using Tapatalk

Title: Re: Quick ONR
Post by: Blown F-150 on November 04, 2018, 09:56:48 AM
Man, I love that stuff!


Sent from my iPhone using Tapatalk
Title: Re: Quick ONR
Post by: Kitzy on November 04, 2018, 05:39:44 PM
Someone remind me what a clean vehicle feels like...

Truck looks good.  ONR still scares me. 

Sent from my Pixel XL using Tapatalk

Title: Re: Quick ONR
Post by: sscully on November 04, 2018, 11:25:04 PM
...<snip>.. ONR still scares me. 

Sent from my Pixel XL using Tapatalk

why does ONR scare you ? 

If it is used correctly, it is safe. 

Dust / dry rain spots only.
- Mud caked on the rocker panels is not correct usage. :redneck:
Title: Re: Quick ONR
Post by: Kitzy on November 05, 2018, 07:28:26 AM
...<snip>.. ONR still scares me. 

Sent from my Pixel XL using Tapatalk

why does ONR scare you ? 

If it is used correctly, it is safe. 

Dust / dry rain spots only.
- Mud caked on the rocker panels is not correct usage. :redneck:
My brain knows this.  My heart doesn't believe it.  It's just one of those things that doesn't seem right even though you know it's fine.
 

Sent from my Pixel XL using Tapatalk

Title: Re: Quick ONR
Post by: gesfour on November 08, 2018, 08:14:36 AM
I have the same problem - I know that I can and should use ONR, it just makes me nervous.  I have a car that we use primarily for traveling that we don't otherwise drive very often so it isn't often dirty, just typical garage dust.  I hate taking the time to give it a full wash - especially because it is quite large - when I'm only cleaning off dust.  One of these days maybe I will give it a try.  Although I might wait until right before I see Tom so that if I screw it up, he can help me with the paint correction!   :funny: 
Title: Re: Quick ONR
Post by: Rollingrock on November 08, 2018, 09:58:05 AM
Here are two old videos I did using ONR

https://www.youtube.com/watch?v=spB6pVSG7Zs (https://www.youtube.com/watch?v=spB6pVSG7Zs)

https://www.youtube.com/watch?v=LTypgZsvEPc (https://www.youtube.com/watch?v=LTypgZsvEPc)

Title: Re: Quick ONR
Post by: gesfour on November 08, 2018, 10:20:55 AM
Actually, those vids were very helpful.  I may give it a whirl and see what happens.  What ratio do you use for the ONR bucket?  As set forth on the container or do you add a bit more ONR? 
Title: Re: Quick ONR
Post by: Rollingrock on November 08, 2018, 11:10:27 AM
Actually, those vids were very helpful.  I may give it a whirl and see what happens.  What ratio do you use for the ONR bucket?  As set forth on the container or do you add a bit more ONR?

using a 5 gal bucket I put in about 1-2 ounces of ONR. Bucket about half full, don't need a lot of water.      If you are using the smaller ONR bottle, they say to use 1-2 caps fulls.   I would still use 2 bucket method.   The Lake Country Grout sponges are also great for this. 

I only buy it by the gallon so I just dump some in until it looks like it is enough. 
Title: Re: Quick ONR
Post by: sscully on November 09, 2018, 10:26:16 AM
Actually, those vids were very helpful.  I may give it a whirl and see what happens.  What ratio do you use for the ONR bucket?  As set forth on the container or do you add a bit more ONR?

I'm a little different than JP.

I use 1 oz per gal for the solution.  I have a 3 gal bucket with a 2 gal mark and use a pro blend bottle cap on it set at 2 oz so the bucket is the same every time.
They come in quart and gal thread sizes.
(https://www.usplastic.com/catalog/images/products/Bottles/400/66690p.jpg)

Before I do a section I use ONR at QD ratio.  2 oz ONR : 30 Oz water in a quart bottle with a double mist spray head on it. 
- Get it in the Agri-Pro brand not the auto detailing branded version.  50% less for the same head.  I learned this the hard way.
(https://s7d5.scene7.com/is/image/PetsUnited/KV-86612-pt?wid=250&hei=297)

I spray down the panel I am going to clean with the QD ratio, then get my LC blue Grout sponge and clean that section ( EG: half the hood ).  I only do from the rocker panel up with the blue grout sponge.
I use a regular drying towel to dry the section.

Once I have everything from the rocker panels up done, I use an aqua sponge to do the rocker panels last.  These get trashed pretty quick and are cheaper than the LC Blue grout sponges. 
Anything I pick up down there I don't want on the LC sponge, to worry about getting out on the pail pal wash board in the 2nd bucket.  More belt and suspenders than anything else with 2 sponge method.
SimplePortal 2.3.3 © 2008-2010, SimplePortal