The Detailers Cafe
General Category => General Discussion => Topic started by: Robby32 on February 19, 2017, 03:56:16 PM
-
My Gilmore Gun just is not doing the job. I have to feather the pressure to get any foam and then it is still mostly water. All openings are not plugged and open in the gun.
I have the old style with brass top which has the slide with holes in it. I see there is a newer one called Gilmore Foamaster II - Thoughts on it.
Would like recommendations for a replacement if not Foramaster II.
:Me:
Thanks for your assistance.
-
I have two of the original Gilmour Foam Guns with all brass fittings - probably just like the one you have. After a number of years, they both did pretty much the same thing yours did. I tried soaking the parts, boiling the parts and scrubbing the parts to get whatever was gunked up cleared out. No dice. What I finally ended up doing was continuing to use the one that still worked pretty well and keeping the other for parts.
As for the new gun they offer, I looked it up and really don't see any noticeable external differences. Maybe they made some internal changes that addressed the problems we both saw?
-
TS -
The photo of the Foamaster II on Amazon the top looks like it has a dial for the settings. Not the brass slider.
Thanks for your input.
-
Sorry. I somehow pulled up the wrong one. You're right in that it does look different. It also looks like it has less brass & more plastic though. Not impressed.
-
TS-
Does look like more plastic ? improvement or not ?
Will see if others have had experience with either No. 1 or 2.
Or have good experience with another make.
-
TS -
PROBLEM SOLVED. :clap:
I took it apart and ran a paper clip (small size) though the openings - front to back and back to front and top to bottom and bottom to top.
Works like new - must have been clogged somewhere.
Thanks for your help.
-
Geez, I tried that and it didn't do a thing. Maybe I'll try it again. Thanks!
-
I have had the old ones and the new ones.
The new ones with the dial are 100% better. they work....get one and you will be happy.
Had similar problems as both of you with older style. None since moving to new style with dial. Foam Galore.
RR
-
JP -
Thanks for the info. But since mine is working again I'll hold off on a new one. Good to know if I need to replace later on.