The Detailers Cafe

Detailing Products => LSP's (Last Step Products) => Topic started by: Obsessive Detail on May 05, 2015, 09:41:12 PM

Title: Speed Seal Beading Action
Post by: Obsessive Detail on May 05, 2015, 09:41:12 PM: Here is a video from last night of Speed Seal in action. It was pouring down rain and we didn't even have to use our wipers. This stuff is crazy easy to use and so far the results have been amazing. An 8 ounce bottle dilutes to make 32 ounces of product.

(http://i518.photobucket.com/albums/u348/ObsessiveDetail/th_IMG_1190_zpseq2znila.mp4) (http://i518.photobucket.com/albums/u348/ObsessiveDetail/IMG_1190_zpseq2znila.mp4)
http://stores.theragshack.com/c-a-r-bullet-proof-series-speed-seal-8oz/ (http://stores.theragshack.com/c-a-r-bullet-proof-series-speed-seal-8oz/)
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 06, 2015, 07:55:58 PM: This product intrigues me. I may have to pick it up. I love OptiSeal on my windshield. This product just looks so Damn easy. How long is it realistically supposed to last?

Tapatalkin...
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 06, 2015, 09:32:14 PM: I've heard of some people getting at least 3 months out of it on some of the detailing forums.
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 06, 2015, 09:53:21 PM: I picked some up. So Mike now you have to.
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 06, 2015, 10:00:05 PM: I agree Jason!

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 07, 2015, 04:20:16 AM: What is this peer pressure crap!?

I'm going to pick a few things up later. When it's not 6am.

Tapatalkin...
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 07, 2015, 09:38:11 AM: Justin, so this is 4 parts water and 1 part product?

Damn I gotta order new bottles now too.
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 07, 2015, 09:44:00 AM: 3 parts water and 1 part product.

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 07, 2015, 09:49:17 AM: Quote from: Obsessive Detail on May 07, 2015, 09:44:00 AM
3 parts water and 1 part product.

Sent from my iPhone using Tapatalk

Ok to use on opti-coat?
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 07, 2015, 09:57:32 AM: Yes

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 11, 2015, 10:29:18 AM: Justin.....I have a spare Hyper dressing bottle that shows 3:1. The bottle of product seems mall and the megs bottle seems big so is this still the same ratios? Will this work?

(http://images.tapatalk-cdn.com/15/05/11/94a26b1c62ea1450694fed0b1cb3a6ac.jpg)
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 11, 2015, 10:32:35 AM: That looks like a 32 oz bottle. You will pour all the product into the bottle and the rest with water. Speed Seal is 8 oz and dilutes to make 32 oz.

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 11, 2015, 11:05:58 AM: Quote from: Obsessive Detail on May 11, 2015, 10:32:35 AM
That looks like a 32 oz bottle. You will pour all the product into the bottle and the rest with water. Speed Seal is 8 oz and dilutes to make 32 oz.

Sent from my iPhone using Tapatalk

roger that, it is a 32oz

Damn, I am going to be stingy on the amount of spray out of the head.
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 11, 2015, 11:15:47 AM: Yeah it goes a long way. Set your sprayer so you have a nice wide mist.

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 11, 2015, 07:07:52 PM: Good call, Jason. I have a bunch of HD bottles.

Mine came today. A little earlier than expected. Thanks, Justin.

Tapatalkin...
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 11, 2015, 07:31:36 PM: Can't wait to hear what you guys think of it.
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 12, 2015, 07:09:56 PM: Calling for rain Saturday so it may have to wait for me. I may get a chance to wash on Sunday though. Any issues with OptiSeal being two weeks old on the paint?

Tapatalkin...
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 12, 2015, 09:47:26 PM: Quote from: Kitzy on May 12, 2015, 07:09:56 PM
Calling for rain Saturday so it may have to wait for me. I may get a chance to wash on Sunday though. Any issues with OptiSeal being two weeks old on the paint?

Tapatalkin...
nope, it will be fine.

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: gipraw on May 13, 2015, 09:00:21 AM: Any issues with applying over a normal polymer sealant, like Menzerna Powerlock?
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 13, 2015, 09:03:40 AM: Quote from: gipraw on May 13, 2015, 09:00:21 AM
Any issues with applying over a normal polymer sealant, like Menzerna Powerlock?
No, it will bond fine to pretty much any sealant or wax.
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 13, 2015, 07:36:45 PM: I just pulled the jeep out and washed the windshield and treated that...so hopefully I will see a difference in this rain we have.

Gip, you guys getting killed down there too? Our lakes are filling up and releasing water now. Lake Grapevine went from 15 ft down to 8ft up in 2 weeks.
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 13, 2015, 08:56:21 PM: Quote from: Rollingrock on May 13, 2015, 07:36:45 PM
I just pulled the jeep out and washed the windshield and treated that...so hopefully I will see a difference in this rain we have.

Gip, you guys getting killed down there too? Our lakes are filling up and releasing water now. Lake Grapevine went from 15 ft down to 8ft up in 2 weeks.
. Jason

So you got the paint wet and misted the product on, then used a good stream to activate the product correct? If so, did you see how it instantly starts to bead?

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 14, 2015, 10:44:12 AM: Quote from: Obsessive Detail on May 13, 2015, 08:56:21 PM

Quote from: Rollingrock on May 13, 2015, 07:36:45 PM
I just pulled the jeep out and washed the windshield and treated that...so hopefully I will see a difference in this rain we have.

Gip, you guys getting killed down there too? Our lakes are filling up and releasing water now. Lake Grapevine went from 15 ft down to 8ft up in 2 weeks.
. Jason

So you got the paint wet and misted the product on, then used a good stream to activate the product correct? If so, did you see how it instantly starts to bead?

Sent from my iPhone using Tapatalk

Justin, my jeep needs a proper bath but I did get the foam gun out and wash the windshield only, then washed off, sprayed with product then rinsed it off.

It was like sheeting on the glass since it is so vertical. Rain is on the way so a good test.

Will the wipers reduce the amount of time it works?
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 14, 2015, 10:53:56 AM: Quote from: Rollingrock on May 14, 2015, 10:44:12 AM
Quote from: Obsessive Detail on May 13, 2015, 08:56:21 PM

Quote from: Rollingrock on May 13, 2015, 07:36:45 PM
I just pulled the jeep out and washed the windshield and treated that...so hopefully I will see a difference in this rain we have.

Gip, you guys getting killed down there too? Our lakes are filling up and releasing water now. Lake Grapevine went from 15 ft down to 8ft up in 2 weeks.
. Jason

So you got the paint wet and misted the product on, then used a good stream to activate the product correct? If so, did you see how it instantly starts to bead?

Sent from my iPhone using Tapatalk

Justin, my jeep needs a proper bath but I did get the foam gun out and wash the windshield only, then washed off, sprayed with product then rinsed it off.

It was like sheeting on the glass since it is so vertical. Rain is on the way so a good test.

Will the wipers reduce the amount of time it works?
yes using the wipers will reduce the durability. That is what happens with Opti glass too. We barely use ours anymore.

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 14, 2015, 11:10:15 AM: I will do the whole jeep once this damn rain stops. Cannot complain really.

We are officially out of our drought.
Title: Re: Speed Seal Beading Action
Post by: gipraw on May 14, 2015, 11:28:27 AM: Quote from: Rollingrock on May 13, 2015, 07:36:45 PM

Gip, you guys getting killed down there too? Our lakes are filling up and releasing water now. Lake Grapevine went from 15 ft down to 8ft up in 2 weeks.

Not as bad as you have been, but more than enough. The South side of town has been getting killed. Flooding in places that don't usually flood. All the Bayous are full.
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 22, 2015, 01:51:19 PM: check out my video with speed seal on the glass.

Wait till the end

https://www.youtube.com/watch?v=wYvgR3fOgx4 (https://www.youtube.com/watch?v=wYvgR3fOgx4)
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 22, 2015, 02:14:38 PM: That is an awesome video, love the end!

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 22, 2015, 03:33:00 PM: Sweeeeet!
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 22, 2015, 03:43:11 PM: Quote from: Kitzy on May 22, 2015, 03:33:00 PM
Sweeeeet!

LOL, I hadn't seen water hit me in a sheet before.
Title: Re: Speed Seal Beading Action
Post by: Blown F-150 on May 22, 2015, 07:26:45 PM: Great video Jason.

How is this stuff for making it easy to get bugs off?
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 23, 2015, 03:49:32 PM: Quote from: Blown F-150 on May 22, 2015, 07:26:45 PM
Great video Jason.

How is this stuff for making it easy to get bugs off?

I think it makes it a lot easier to get bugs off. It pretty much works like a typical sealant, but easier to use.
Title: Re: Speed Seal Beading Action
Post by: Blown F-150 on May 23, 2015, 06:05:54 PM: Thanks Justin,

I will be on the road over the next few weeks, but put together an order when I return.

Enjoy the long weekend.
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on May 23, 2015, 10:21:51 PM: Quote from: Blown F-150 on May 23, 2015, 06:05:54 PM
Thanks Justin,

I will be on the road over the next few weeks, but put together an order when I return.

Enjoy the long weekend.
sounds good! You have a great weekend too!

Sent from my iPhone using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 24, 2015, 07:52:51 PM: I might actually get to try this out tomorrow, finally. Might have to make me one of those saweeeet videos!
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on May 24, 2015, 10:05:04 PM: Quote from: Kitzy on May 24, 2015, 07:52:51 PM
I might actually get to try this out tomorrow, finally. Might have to make me one of those saweeeet videos!

LOL ^^^^ ass
Title: Re: Speed Seal Beading Action
Post by: Kitzy on May 25, 2015, 05:00:15 PM: Haha.

Well it didn't happen. Memorial day festivities got in the way and I did the have enough time.
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on July 14, 2015, 08:47:50 PM: Here is another Speed Seal video in the rain....I tried to hit the puddles....sadly no "SWEEEEEEET"

https://www.youtube.com/watch?v=91WPL4LrW3g (https://www.youtube.com/watch?v=91WPL4LrW3g)
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on July 14, 2015, 09:24:23 PM: Quote from: Rollingrock on July 14, 2015, 08:47:50 PM
Here is another Speed Seal video in the rain....I tried to hit the puddles....sadly no "SWEEEEEEET"

https://www.youtube.com/watch?v=91WPL4LrW3g (https://www.youtube.com/watch?v=91WPL4LrW3g)

Another great video! :hp: Post that on my OD Facebook page if you get a chance.
Title: Re: Speed Seal Beading Action
Post by: Kitzy on July 15, 2015, 07:23:54 PM: No "sweeeeet" no care!

Stuff looks awesome. My goal is to try to wash my truck before I leave for Tennessee August 1st. It's been MONTHS! I really want to try this.

Sent from my VS985 4G using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Kitzy on July 28, 2015, 08:42:20 PM: So I washed my truck this weekend. I didn't go crazy. I'm sure it needs a clay worse than bad. But I tried the speed seal out. Felt like I used a ton of it. The next morning it rained but I didn't experience anything even close to what Jason experience. I'm sure his vertical jeep windshield helps. However, opti seal seemed to work better.

Sent from my VS985 4G using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on July 28, 2015, 11:01:53 PM: Quote from: Kitzy on July 28, 2015, 08:42:20 PM
So I washed my truck this weekend. I didn't go crazy. I'm sure it needs a clay worse than bad. But I tried the speed seal out. Felt like I used a ton of it. The next morning it rained but I didn't experience anything even close to what Jason experience. I'm sure his vertical jeep windshield helps. However, opti seal seemed to work better.

Sent from my VS985 4G using Tapatalk

I hardly ever use very much product, maybe a little over an ounce. All that you have to do is just mist it on where it is covering the surface and you are good to go.

I like Opti Seal, but to me Speed Seal is so much easier and quicker to use. Our windshield also beads like crazy and we hardly ever use our wipers, maybe with your Jeep is sheeting from the difference angle of the windshield.
Title: Re: Speed Seal Beading Action
Post by: gipraw on July 30, 2015, 10:44:28 AM: How would this perform going over a normal wax or sealant?
Title: Re: Speed Seal Beading Action
Post by: Obsessive Detail on July 31, 2015, 08:57:10 AM: Quote from: gipraw on July 30, 2015, 10:44:28 AM
How would this perform going over a normal wax or sealant?
It will bond over anything.
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on August 02, 2015, 09:46:02 AM: Quote from: Kitzy on July 28, 2015, 08:42:20 PM
So I washed my truck this weekend. I didn't go crazy. I'm sure it needs a clay worse than bad. But I tried the speed seal out. Felt like I used a ton of it. The next morning it rained but I didn't experience anything even close to what Jason experience. I'm sure his vertical jeep windshield helps. However, opti seal seemed to work better.

Sent from my VS985 4G using Tapatalk

What cha mean? Did you drive in the rain or just look at the truck in the rain?
Title: Re: Speed Seal Beading Action
Post by: Kitzy on August 02, 2015, 10:22:43 AM: I drove it in the rain. I noticed a difference, don't get me wrong. It just didn't look like yours and I didn't find it any better than opti seal.

Sent from my VS985 4G using Tapatalk
Title: Re: Speed Seal Beading Action
Post by: Rollingrock on August 03, 2015, 08:47:07 AM: https://www.youtube.com/watch?v=EF8GhC-T_Mo (https://www.youtube.com/watch?v=EF8GhC-T_Mo)
Title: Re: Speed Seal Beading Action
Post by: Kitzy on August 03, 2015, 07:21:32 PM: Quote from: Rollingrock on August 03, 2015, 08:47:07 AM
https://www.youtube.com/watch?v=EF8GhC-T_Mo (https://www.youtube.com/watch?v=EF8GhC-T_Mo)
I literally couldn't look at that anymore.

Tapatalkin...